The PLE-1P120 and PLE-1P240 are two high-power plug-and-play amplifiers that deliver 120 and 240 Watts to constant voltage or 8 ohm loads.
Built with premium quality and protections, they offer basic functionality at a budget price. The amplifiers offer straight 1 V and 100 V line in, and 70 V, 100 V and 8 ohms out. They can extend the power of the PLE- series mixer amplifiers, be combined with any audio mixer, work anywhere where more power on an existing 100 V line is needed or when a line level signal
The unit operates both on mains power and on a 24 V battery power supply for emergency back up, with automatic switchover. The amplifier also has a built in charger to charge the connected battery. The system has a balanced input and loop‐through facility. This makes it easy to connect multiple amplifiers. The secondary input is a 100 V line input to connect the amplifier to a 100 V loudspeaker line to provide more power in remote locations.
Gain or level control is located on the rear of the unit to avoid accidental setting change. A meter with LED bar shows the output level. The amplifier has a 70 V or 100 V output for constant voltage loudspeaker systems, and a low impedance output for 8 ohm loudspeaker loads.
Mains power supply
115 - 230 VAC ±10%, 50/60 Hz
9/18 A (230/115 VAC)
Battery power supply
24 VDC ±15%
Charge float voltage
Max / rated power
360 W / 240 W
Power reduction on backup power
50 Hz to 20 kHz (+1/‐3 dB @ ‐10 dB ref. rated output)